Add kerf-in weatherstrip to existing door frames without pulling the frame or buying a $400 dedicated kerf tool. This base holds your palm router at 45°, and tilted back, so the cutter reaches tight into the corner of the door stop and cuts a clean 1/8" kerf for barbed door seals.
Includes:
Router base for your selected model.
3-1/8" long × 1/8" kerf cutter, 1/4" shank
Built-in 1.75" dust port. Vacuum adapters available for specific vacuum systems from D3 Engineering
Instruction packet: router setup, cutting steps, and weatherstrip installation
Compatible with the Arched Door Kit for arched and curved door frames
Router not included.
Don't see your router? Pick "Other" and I'll design a base for it at no charge. Fitment questions: D3engineeringco@gmail.com
Made in the USA.
No routers are included in purchase.
Made for the Corner Groove Router Base, this adapter converts the standard router base to a curved/arched door base.
The adapter has a dovetail that snaps into the side of the router base that contours to the arch in your door. This keeps the base in contact with more of the door frame and allows a precise groove in the arched transition. Once the arch has been grooved, the adapter can be pulled out of the router for the rest of the door frame.
The adapters are a firm rubber that contours to different arch sizes, there are two adapters sizes the cover 30” diameter arch up to 72” diameter arch door.
This kit includes one upgraded aerator with your choice of battery pack, as well as two Bait Station Latch Assemblies. I have used these latches for the last 5 years with 0 issues before I realized other people must have the same issue.
This kit solves two problems that most bait station users run into. First being the poor Aerator that comes stock, this aerator mounts using the existing hardware your bait station came with but uses a long life pump that uses reachable drill/tool batteries you already have. The second poor design about this bait station is the latches not lasting, as soon as the temperatures drop the latches will snap. These latches are designed for the cold and work great in the heat.
Aerator Features:
Powered by your choice of drill batteries (not included) Dewalt 20v, Milwaukee M18, Ridgid 18v, and Makita 18V. If you have a battery that is not listed please reach out.
Significant improvement in air flow over original bait station aerator
Can be used with drill batteries or included wall adaptor with the flip of a switch.
Compact and easy to transport
Improved air flow reduces ice build up
5000 hour medical grade air pump
4AH battery last 48 hours in below 0 temperatures while also keeping the bucket from freezing over.
Latch Features.
5 year replacement warranty!
Real world tested for the last 5 years with no issues.
Great cold weather performance.
reinforced polymer and stainless steel pins.
If you manage to break one reach out and I will replace it free of charge.
Proudly manufactured in Appleton, Wisconsin, USA.
This live bait aerator is powered by standard cordless drill batteries, providing reliable airflow with batteries everyone already has. It is designed for anglers who need consistent oxygen delivery and long run time in portable bait systems.
Using drill batteries allows extended operation and quick battery changes in the field. Remove the battery from your K-drill or Lite-Flite when you are done drilling and keep your minnows fresh and de-iced the rest of the day.
Powered by your choice of drill batteries (not included) Dewalt 20v, Milwaukee M18, Ridgid 18v, and Makita 18V. If you have a battery that is not listed please reach out.
Significant improvement in air flow over original bait station aerator
Can be used with drill batteries or included wall adaptor with the flip of a switch.
Compact and easy to transport
Improved air flow reduces ice build up
5000 hour medical grade air pump
4AH battery last 48 hours in below 0 temperatures while also keeping the bucket from freezing over.
Stock aerators commonly fail due to weak motors, switch issues, and battery limitations. This upgrade replaces those weak points with a more reliable system.
Standard setups using D batteries have limited runtime. Using a drill battery significantly increases runtime depending on capacity. 4 amp hour battery last over 2 days in sub zero temperatures.
Yes—this product is specifically designed as an upgrade to improve airflow, runtime, and reliability.
A high-output aerator with a reliable power source performs best in cold conditions. This upgrade is built specifically for those environments.
Made for the Corner Groove Router Base, this adapter converts the standard 1-7/8” port on the base to your tool system or size.
The adapter has a twist lock design that keeps the vacuum connected to the base.
If your system is not available select “other” in the drop down and I will design one. Please check your email for contact.
This is a replacement latch designed for all sizes of Frabill Magnum bait stations. It has been designed and tested to handle cold weather and harsh conditions common in ice fishing environments.
The latch matches the original mounting location and installs using the factory hardware with no modification required. Once installed, it restores proper closure and keeps the bait station closed during transport and use.
This latch is intended as a direct replacement for the original plastic latch commonly found on Frabill Magnum bait stations.
If you need more than just the top latch, also see the Frabill Magnum bait station latch assembly.
Made in Appleton, Wisconsin, USA, and backed by a 5-year replacement warranty.
This is the complete latch assembly for Frabill Magnum bait stations. It replaces the original latch and is designed to be stronger and more durable than the factory parts that often crack or fail.
The assembly fits all sizes of Frabill Magnum bait stations and installs using the original mounting locations and hardware.
This replacement assembly is intended to address common latch wear and failure while maintaining proper fit and operation.
This latch assembly is proudly manufactured in Appleton, Wisconsin, and backed by a 2-year replacement warranty. Please include any notes in your order if screws or additional pins are needed.
This is the complete latch assembly for Plano Frost Cooler. It replaces the original latch and is designed to be stronger and more durable than the factory parts that often crack or fail.
The assembly fits all sizes of Plano Frost coolers and installs using the original mounting locations and hardware.
This replacement assembly is intended to address common latch wear and failure while maintaining proper fit and operation.
This latch assembly is proudly manufactured in Appleton, Wisconsin, and backed by a 2-year replacement warranty. Please include any notes in your order if screws or additional pins are needed.
This is the same as the normal bait station latch with visual blemishes and a reduced price. The latch still works correctly and is still warrantied but can have physical blemishes from the manufacturing process.
Still backed by a 5-year replacement warranty.
These are limited stock and pictures are representations of what latches can look like.
The geometry and mounting interface match the original component to ensure correct mirror position, stability, and visibility during operation.
Designed to be slighly stronger than the factory orginals to prevent the accidetal damage these are prone to. The bracket is intended to withstand vibration, environmental exposure, and regular riding conditions. It installs in the factory mounting location without modification.
This component is manufactured as a functional replacement part and is not an OEM Yamaha product or affiliated with Yamaha Motor Corporation.
No results match your search. Try removing a few filters.
